Plumbing problems are never fun. From a clogged sink to a burst pipe, they always seem to come at the worst time.
But don’t worry – we’re here to help! In this blog post, we’ll discuss some of the most common plumbing issues and how to easily solve them or even prevent them in the first place.
So read on for helpful tips and tricks that will have your plumbing working like new in no time!
If water is backing up into your sink, tub, or shower, it’s likely that you have a blocked drain. This is one of the most common plumbing issues and can be caused by everything from hair to grease build-up.
The good news is that it’s usually a fairly easy fix. Start by using a plunger to see if that does the trick. If not, you may need to use a drain snake or chemical drain cleaner to clear the blockage.
If that doesn’t work then finding blocked drain services in Perth or wherever you are will do the trick. The professionals will have the right tools and knowledge to get your drain unclogged in no time.
A leaky faucet is not only annoying, but it can also waste a lot of water. If you have a drip from your faucet, it’s likely that the washer needs to be replaced.
This is a relatively easy fix that anyone can do – simply remove the handle of the faucet and replace the washer.
If you’re not sure how to do this, there are plenty of online tutorials or you can ask a professional for help. When choosing a new washer, be sure to get the right size and type for your faucet.
Low Water Pressure
If you’re getting a weak stream of water from your faucets, it’s likely that you have low water pressure. This is usually caused by a build-up of sediment in your pipes.
To clean out your pipes and improve water flow, start by running hot water through them for a few minutes.
If that doesn’t work, then you can try using a vinegar and water solution or a commercial pipe cleaner. If all else fails, then you may need to call a professional to take a look at your pipes.
A running toilet is not only annoying, but it can also waste a lot of water. If you hear your toilet running even when it’s not in use, it’s likely that the flapper needs to be replaced.
The flapper is a small rubber or plastic piece that covers the flush valve and allows water to enter the bowl when you flush.
Over time, it can become worn out or damaged, causing it to leak water. To fix this, simply turn off the water to your toilet and flush the handle to empty the tank.
Then, remove the lid and find the flapper. Simply disconnect it from the flush valve and replace it with a new one. If you’re not sure how to do this, there are plenty of online tutorials or you can ask a professional for help.
A burst pipe can be a major plumbing issue. If you have water shooting out from your pipes, it’s important to act fast. First, turn off the water to your home at the main shut-off valve.
Then, call a professional to come and take a look. They will be able to determine the cause of the burst pipe and fix it quickly.
Look for signs like water stains on your ceilings or walls, an unusually high water bill, or water pooling in your yard. These can all be signs of a leaky pipe that needs to be fixed before it bursts.
A clogged toilet is one of the most common plumbing issues. It can be caused by anything from too much toilet paper to baby wipes.
If your toilet is clogged, try using a plunger to see if that does the trick. If not, you may need to use a plumber’s snake or chemical drain cleaner to clear the blockage.
If all else fails, then you may need to call a professional to take a look at your pipes. To prevent a clogged toilet, be sure to only flush toilet paper and human waste down the drain.
Avoid flushing anything else, like diapers, sanitary napkins, or baby wipes.
Water Heater Issues
If you’re having issues with your water heater, it’s important to act fast. A broken water heater can not only cause inconvenience but can also be a safety hazard.
If you notice that your water isn’t as hot as it used to be or there are water stains around your water heater, then it’s time to call a professional.
They will be able to diagnose the problem and fix it quickly. In the meantime, you can try turning up the temperature on your water heater or bleeding the radiator valves to release any air that may be trapped in the system.
Leaking Hose Bib
If you turn on your hose bib (the outside faucet) and notice a drip, it may be time to replace the washer.
To do this, simply shut off the water to the hose bib at the main water shut-off valve for your house.
Once the water is off, remove the handle of the hose bib so that you can access the packing nut. This is a large nut that holds everything together.
Use an adjustable wrench to loosen (but not remove) the packing nut. Next, use a pair of pliers to remove the stem by pulling it out towards you.
The washer is located at the bottom of this stem. Remove any debris from the area and then insert a new washer into the stem.
Be sure that the new washer is facing the right direction before reassembling everything.
Once the new washer is in place, put the stem back into the packing nut and tighten everything up with the adjustable wrench.
Turn on the water at the main shut-off valve and check for leaks. If there are no leaks, you’re all set!
These are just a few of the most common plumbing issues that homeowners face. If you’re having any problems with your plumbing, be sure to call a professional right away.
They will be able to diagnose the problem and fix it quickly. In the meantime, take steps to prevent any further damage by shutting off the water at the main shut-off valve and avoiding using any fixtures or appliances that may be affected.